Deep Well Pumps are designed for pumping of dringking water, treated water, raw water, and sea water as well as mineral and thermal waters not containing long, abrasive fibres elements. maximum sand content in the pumping water is 50 - 100 g/m3. Well pumps are designed for pumping of water from well of 4", 6", 8", 10", 14" diameter minimum. Pumps are mainly installed in borehole wells where the dynamic water level at pumping water capacity is known. The capacity of the well should be bigger then maximum output of the pump.
Pumps are used in :
Water supply system.
Pumping system and liquid pressure boosting system used in technological processes.
System use for lowering the ground-water level.
Irigation system.
Type deep-well pumps are, among other, characterized by :
Modern design solutions.
Guaratee of long-standing, reliable operation.
Relative low cost of purchase comparing to quality as well as low operation.
1 years guarantee in indonesian.
The complete manufacturing process of pumps takes pleace in the parent factory, which guanrantees flexible deliveries and quickly accessible spare parts,.
Rewindable motors.
Motors can be optionally equipped whit temperatur sensor.
Coupling of the pumps whit the engine as per the NEMA standard allows for flexibility during engine selections.
Relatively high durability in difficult operating conditions.
Pumping sets may be delivered equipped whit hermetically sealed jackets and suction jackets.
Material Versions :
Shaft and coupling - stainless steel.
Middle casing - stainless steel or allow cast iron.
Central casing - cast iron or copper cast iron or bronze.
Casing - cast iron or ductile cast iron or bronze.
Body - stainless steel or allow cast iron or brass.
Impeler - plastic combined whit brass or brass or bronze or noryl.
Price by phone
Tidak ada komentar:
Posting Komentar